JCB HM380Blunt Tool
Part code: 218033940
Furukawa F1200 Blunt Tool
- Breaker: Furukawa F1200
- Tool type: Blunt tool
- Diameter: 140 mm
- Length: 1200 mm
- Weight: 135 kg
- Material: OEM quality, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Blunt tool for the Furukawa F1200 hydraulic breaker: Ø140 mm diameter, 1200 mm length, 135 kg. OEM quality, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | Furukawa F1200 |
|---|---|
| Tool Type | Blunt Tool |
| Option | Standard |
| Diameter | 140 mm |
| Overall Length | 1200 mm |
| Weight | 135 kg |
| Material | Heat-treated alloy steel |
| Product Code | 240056940 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Blunt Tool Used?
Blunt tools are designed to channel the full impact energy of the breaker straight into the toughest materials. They are built for maximum energy transfer and durability.
- Primary demolition
- Secondary demolition
- Secondary breaking
- Boom mounted applications
- Tunneling
According to the material table in our manual, it is recommended for large block breaking, crystalline rock such as granite and gabbro, and recycling of demolition debris.
The standard tool is made for general demolition, construction and quarry work. In very hard and abrasive rock the hard rock version lasts longer.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for Furukawa F1200
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ140 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Chisel ToolØ140 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ140 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ140 x 1200 mm | Standard (this page) · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your Furukawa F1200, write to sales@hkm.com.tr.
Furukawa F1200 Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
For other Furukawa models see Furukawa tools and spare parts.
Manufacturing, Delivery and Warranty
HKM manufactures this tool to OEM quality from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the Furukawa F1200 blunt tool?
A: The Furukawa F1200 blunt tool is made for the Furukawa F1200 hydraulic breaker: diameter 140 mm, overall length 1200 mm, weight 135 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my Furukawa F1200?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the Furukawa F1200.
Q: What is the Furukawa F1200 blunt tool used for?
A: The Furukawa F1200 blunt tool is mainly used for: primary demolition, secondary demolition, secondary breaking, boom mounted applications, tunneling. According to the material table in our manual, it is recommended for large block breaking, crystalline rock such as granite and gabbro, and recycling of demolition debris.
Q: What is the difference between the Furukawa F1200 standard and hard rock blunt tool?
A: The hard rock version is made from a high-nickel alloy and goes through a special hardening process; it is recommended for quarrying, mining and abrasive rock. The standard tool is enough for general demolition and construction. Blunt tools have no dust grooved version.
Q: Which other tool types are available for the Furukawa F1200?
A: We make 14 different tools for the Furukawa F1200: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the Furukawa F1200 blunt tool?
A: If the Furukawa F1200 blunt tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the Furukawa F1200 blunt tool covered by warranty?
A: Like all HKM breaker tools, the Furukawa F1200 blunt tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the Furukawa F1200 blunt tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my Furukawa F1200?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis. The Furukawa F1200 bushings are listed in the Spare Parts section on this page.
Q: What other names is the Furukawa F1200 blunt tool known by?
A: It is also called “blunt”, “flat end”, “blunt point”. Furukawa documents use “blunt tip”, “working steel”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 135
- Dimensions
- 140x1200x140 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Blunt Tool
Part code: 211009940
Rammer E68Blunt Tool
Part code: 260029940
Soosan SB50Blunt Tool
Part code: 211014940
Furukawa F22Blunt Tool
Part code: 240035940
Furukawa HB20GBlunt Tool
Part code: 240020940
Rammer BR999Blunt Tool
Part code: 260038940
Montabert V55Blunt Tool
Part code: 210061940
Rammer G80Blunt Tool
Part code: 260058940
Socomec MDO250Blunt Tool
Part code: 254015940
Soosan SB70Blunt Tool
Part code: 211017940
Furukawa F35Blunt Tool
Part code: 240038940
