JCB HM380Blunt Tool
Part code: 218033940
HKM R260 Blunt Tool
- Breaker: HKM R260
- Tool type: Blunt tool
- Diameter: 150 mm
- Length: 1200 mm
- Weight: 154 kg
- Material: genuine HKM tool, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Blunt tool for the HKM R260 hydraulic breaker: Ø150 mm diameter, 1200 mm length, 154 kg. Genuine HKM tool, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | HKM R260 |
|---|---|
| Tool Type | Blunt Tool |
| Option | Standard |
| Diameter | 150 mm |
| Overall Length | 1200 mm |
| Weight | 154 kg |
| Material | Heat-treated alloy steel |
| Product Code | 292019940 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Blunt Tool Used?
Blunt tools are designed to channel the full impact energy of the breaker straight into the toughest materials. They are built for maximum energy transfer and durability.
- Primary demolition
- Secondary demolition
- Secondary breaking
- Boom mounted applications
- Tunneling
According to the material table in our manual, it is recommended for large block breaking, crystalline rock such as granite and gabbro, and recycling of demolition debris.
The standard tool is made for general demolition, construction and quarry work. In very hard and abrasive rock the hard rock version lasts longer.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for HKM R260
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ150 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Chisel ToolØ150 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ150 x 1200 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ150 x 1200 mm | Standard (this page) · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your HKM R260, write to sales@hkm.com.tr.
HKM R260 Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
- HKM R260 Lower Bushing
- HKM R260 Upper Bushing
- HKM R260 Thrust Bushing
- HKM R260 Retaining Pin
- HKM R260 Piston
- HKM R260 Tie Rod
- HKM R260 Diaphragm
- HKM R260 Front Head
- HKM R260 Seal Kit
For other HKM models see HKM tools and spare parts.
Manufacturing, Delivery and Warranty
HKM manufactures this genuine HKM tool from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the HKM R260 blunt tool?
A: The HKM R260 blunt tool is made for the HKM R260 hydraulic breaker: diameter 150 mm, overall length 1200 mm, weight 154 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my HKM R260?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the HKM R260.
Q: What is the HKM R260 blunt tool used for?
A: The HKM R260 blunt tool is mainly used for: primary demolition, secondary demolition, secondary breaking, boom mounted applications, tunneling. According to the material table in our manual, it is recommended for large block breaking, crystalline rock such as granite and gabbro, and recycling of demolition debris.
Q: What is the difference between the HKM R260 standard and hard rock blunt tool?
A: The hard rock version is made from a high-nickel alloy and goes through a special hardening process; it is recommended for quarrying, mining and abrasive rock. The standard tool is enough for general demolition and construction. Blunt tools have no dust grooved version.
Q: Which other tool types are available for the HKM R260?
A: We make 14 different tools for the HKM R260: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the HKM R260 blunt tool?
A: If the HKM R260 blunt tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the HKM R260 blunt tool covered by warranty?
A: Like all HKM breaker tools, the HKM R260 blunt tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the HKM R260 blunt tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my HKM R260?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis. The HKM R260 bushings are listed in the Spare Parts section on this page.
Q: What other names is the HKM R260 blunt tool known by?
A: It is also called “blunt”, “flat end”, “blunt point”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 154
- Dimensions
- 150x1200x150 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Blunt Tool
Part code: 211009940
Rammer E68Blunt Tool
Part code: 260029940
Soosan SB50Blunt Tool
Part code: 211014940
Furukawa F22Blunt Tool
Part code: 240035940
Furukawa HB20GBlunt Tool
Part code: 240020940
Rammer BR999Blunt Tool
Part code: 260038940
Montabert V55Blunt Tool
Part code: 210061940
Rammer G80Blunt Tool
Part code: 260058940
Socomec MDO250Blunt Tool
Part code: 254015940
Soosan SB70Blunt Tool
Part code: 211017940
Furukawa F35Blunt Tool
Part code: 240038940
