JCB HM380Hard Rock Moil Point Tool
Part code: 218033925
Kent KHB30GII Hard Rock Moil Point Tool
- Breaker: Kent KHB30GII
- Tool type: Hard rock moil point tool
- Diameter: 150 mm
- Length: 1300 mm
- Weight: 168 kg
- Material: OEM quality, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Hard rock moil point tool for the Kent KHB30GII hydraulic breaker: Ø150 mm diameter, 1300 mm length, 168 kg. OEM quality, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | Kent KHB30GII |
|---|---|
| Tool Type | Moil Point Tool |
| Option | Hard Rock |
| Diameter | 150 mm |
| Overall Length | 1300 mm |
| Weight | 168 kg |
| Material | High-nickel alloy steel, special hardening |
| Product Code | 240134925 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Moil Point Tool Used?
Moil point tools are made for loosely bound or easily separable materials. Their slender, tapered profile allows pinpoint tip placement, so each impact drives the tool into the material without deflection, with less chatter and slippage.
- Primary demolition
- Primary breaking
- Trenching
- Scaling
- Recycling
According to the material table in our manual, it is recommended for non-reinforced concrete slabs, walls and foundations, and for lightly fractured or massive sedimentary rock (limestone, sandstone).
The hard rock version is made from a high-nickel alloy and goes through a special hardening process. It withstands extreme impact forces and abrasive rock, and is the preferred choice for heavy quarrying and mining.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for Kent KHB30GII
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ150 x 1300 mm | Standard · Dust Grooved · Hard Rock (this page) · Dust Grooved + Hard Rock |
| Chisel ToolØ150 x 1300 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ150 x 1300 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ150 x 1300 mm | Standard · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your Kent KHB30GII, write to sales@hkm.com.tr.
Kent KHB30GII Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
For other Kent models see Kent tools and spare parts.
Manufacturing, Delivery and Warranty
HKM manufactures this tool to OEM quality from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the Kent KHB30GII hard rock moil point tool?
A: The Kent KHB30GII hard rock moil point tool is made for the Kent KHB30GII hydraulic breaker: diameter 150 mm, overall length 1300 mm, weight 168 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my Kent KHB30GII?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the Kent KHB30GII.
Q: What is the Kent KHB30GII hard rock moil point tool used for?
A: The Kent KHB30GII hard rock moil point tool is mainly used for: primary demolition, primary breaking, trenching, scaling, recycling. According to the material table in our manual, it is recommended for non-reinforced concrete slabs, walls and foundations, and for lightly fractured or massive sedimentary rock (limestone, sandstone).
Q: When should I choose a hard rock moil point tool for the Kent KHB30GII?
A: The hard rock version is made from a high-nickel alloy and goes through a special hardening process. It withstands extreme impact forces and abrasive rock, and is the preferred choice for heavy quarrying and mining. For general demolition and construction the standard tool is enough.
Q: Which other tool types are available for the Kent KHB30GII?
A: We make 14 different tools for the Kent KHB30GII: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the Kent KHB30GII hard rock moil point tool?
A: If the Kent KHB30GII hard rock moil point tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the Kent KHB30GII hard rock moil point tool covered by warranty?
A: Like all HKM breaker tools, the Kent KHB30GII hard rock moil point tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the Kent KHB30GII hard rock moil point tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my Kent KHB30GII?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis.
Q: What other names is the Kent KHB30GII hard rock moil point tool known by?
A: It is also called “moil”, “moil point”, “moil tool”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 168
- Dimensions
- 150x1300x150 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Hard Rock Moil Point Tool
Part code: 211009925
Rammer E68Hard Rock Moil Point Tool
Part code: 260029925
Soosan SB50Hard Rock Moil Point Tool
Part code: 211014925
Furukawa F22Hard Rock Moil Point Tool
Part code: 240035925
Furukawa HB20GHard Rock Moil Point Tool
Part code: 240020925
Rammer BR999Hard Rock Moil Point Tool
Part code: 260038925
Montabert V55Hard Rock Moil Point Tool
Part code: 210061925
Rammer G80Hard Rock Moil Point Tool
Part code: 260058925
Socomec MDO250Hard Rock Moil Point Tool
Part code: 254015925
Soosan SB70Hard Rock Moil Point Tool
Part code: 211017925
Furukawa F35Hard Rock Moil Point Tool
Part code: 240038925
