JCB HM380Dust Grooved Pyramid Tool
Part code: 218033932
T&H TH650 Dust Grooved Pyramid Tool
- Breaker: T&H TH650
- Tool type: Dust grooved pyramid tool
- Diameter: 196 mm
- Length: 1700 mm
- Weight: 389 kg
- Material: OEM quality, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Dust grooved pyramid tool for the T&H TH650 hydraulic breaker: Ø196 mm diameter, 1700 mm length, 389 kg. OEM quality, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | T&H TH650 |
|---|---|
| Tool Type | Pyramid Tool |
| Option | Dust Grooved |
| Diameter | 196 mm |
| Overall Length | 1700 mm |
| Weight | 389 kg |
| Material | Heat-treated alloy steel |
| Product Code | 252009932 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Pyramid Tool Used?
Pyramid tools penetrate non-abrasive materials of varying strength quickly. The pointed geometry and cutting angle give high penetration rates with little effort in concrete and similar materials.
- Primary demolition
- Secondary demolition
- Trenching
- Recycling
- Tunneling
- Primary breaking
- Landscaping
According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
The dust grooves guide dust and fine particles away from the breaking zone. Visibility and precision improve, tool wear and heat build-up drop, and the tool keeps its performance longer.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for T&H TH650
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ196 x 1700 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Chisel ToolØ196 x 1700 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ196 x 1700 mm | Standard · Dust Grooved (this page) · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ196 x 1700 mm | Standard · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your T&H TH650, write to sales@hkm.com.tr.
T&H TH650 Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
- T&H TH650 Lower Bushing
- T&H TH650 Shank Bushing
- T&H TH650 Retaining Pin
- T&H TH650 Piston
- T&H TH650 Tie Rod
- T&H TH650 Seal Kit
For other T&H models see T&H tools and spare parts.
Manufacturing, Delivery and Warranty
HKM manufactures this tool to OEM quality from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the T&H TH650 dust grooved pyramid tool?
A: The T&H TH650 dust grooved pyramid tool is made for the T&H TH650 hydraulic breaker: diameter 196 mm, overall length 1700 mm, weight 389 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my T&H TH650?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the T&H TH650.
Q: What is the T&H TH650 dust grooved pyramid tool used for?
A: The T&H TH650 dust grooved pyramid tool is mainly used for: primary demolition, secondary demolition, trenching, recycling, tunneling, primary breaking, landscaping. According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
Q: What do the dust grooves on the T&H TH650 dust grooved pyramid tool do?
A: The dust grooves guide dust and fine particles away from the breaking zone. Visibility and precision improve, tool wear and heat build-up drop, and the tool keeps its performance longer.
Q: Which other tool types are available for the T&H TH650?
A: We make 14 different tools for the T&H TH650: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the T&H TH650 dust grooved pyramid tool?
A: If the T&H TH650 dust grooved pyramid tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the T&H TH650 dust grooved pyramid tool covered by warranty?
A: Like all HKM breaker tools, the T&H TH650 dust grooved pyramid tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the T&H TH650 dust grooved pyramid tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my T&H TH650?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis. The T&H TH650 bushings are listed in the Spare Parts section on this page.
Q: What other names is the T&H TH650 dust grooved pyramid tool known by?
A: It is also called “pyramidal point”, “pyramidal moil point”, “pyramid moil”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 389
- Dimensions
- 196x1700x196 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Dust Grooved Pyramid Tool
Part code: 211009932
Rammer E68Dust Grooved Pyramid Tool
Part code: 260029932
Soosan SB50Dust Grooved Pyramid Tool
Part code: 211014932
Furukawa F22Dust Grooved Pyramid Tool
Part code: 240035932
Furukawa HB20GDust Grooved Pyramid Tool
Part code: 240020932
Rammer BR999Dust Grooved Pyramid Tool
Part code: 260038932
Montabert V55Dust Grooved Pyramid Tool
Part code: 210061932
Rammer G80Dust Grooved Pyramid Tool
Part code: 260058932
Socomec MDO250Dust Grooved Pyramid Tool
Part code: 254015932
Soosan SB70Dust Grooved Pyramid Tool
Part code: 211017932
Furukawa F35Dust Grooved Pyramid Tool
Part code: 240038932
