JCB HM380Pyramid Tool
Part code: 218033930
Montabert 501NG Pyramid Tool
- Breaker: Montabert 501NG
- Tool type: Pyramid tool
- Diameter: 106 mm
- Length: 1000 mm
- Weight: 69 kg
- Material: OEM quality, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Pyramid tool for the Montabert 501NG hydraulic breaker: Ø106 mm diameter, 1000 mm length, 69 kg. OEM quality, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | Montabert 501NG |
|---|---|
| Tool Type | Pyramid Tool |
| Option | Standard |
| Diameter | 106 mm |
| Overall Length | 1000 mm |
| Weight | 69 kg |
| Material | Heat-treated alloy steel |
| Product Code | 210091930 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Pyramid Tool Used?
Pyramid tools penetrate non-abrasive materials of varying strength quickly. The pointed geometry and cutting angle give high penetration rates with little effort in concrete and similar materials.
- Primary demolition
- Secondary demolition
- Trenching
- Recycling
- Tunneling
- Primary breaking
- Landscaping
According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
The standard tool is made for general demolition, construction and quarry work. In very hard and abrasive rock the hard rock version, and in dusty conditions the dust grooved version, lasts longer.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for Montabert 501NG
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ106 x 1000 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Chisel ToolØ106 x 1000 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ106 x 1000 mm | Standard (this page) · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ106 x 1000 mm | Standard · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your Montabert 501NG, write to sales@hkm.com.tr.
Montabert 501NG Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
For other Montabert models see Montabert tools and spare parts.
Manufacturing, Delivery and Warranty
HKM manufactures this tool to OEM quality from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the Montabert 501NG pyramid tool?
A: The Montabert 501NG pyramid tool is made for the Montabert 501NG hydraulic breaker: diameter 106 mm, overall length 1000 mm, weight 69 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my Montabert 501NG?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the Montabert 501NG.
Q: What is the Montabert 501NG pyramid tool used for?
A: The Montabert 501NG pyramid tool is mainly used for: primary demolition, secondary demolition, trenching, recycling, tunneling, primary breaking, landscaping. According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
Q: What is the difference between Montabert 501NG standard, dust grooved and hard rock pyramid tools?
A: The standard tool is for general demolition and construction. On the dust grooved tool the grooves guide dust away from the breaking zone and reduce wear and heat. The hard rock tool is made from a high-nickel alloy with a special hardening process, for quarrying and mining.
Q: Which other tool types are available for the Montabert 501NG?
A: We make 14 different tools for the Montabert 501NG: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the Montabert 501NG pyramid tool?
A: If the Montabert 501NG pyramid tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the Montabert 501NG pyramid tool covered by warranty?
A: Like all HKM breaker tools, the Montabert 501NG pyramid tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the Montabert 501NG pyramid tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my Montabert 501NG?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis.
Q: What other names is the Montabert 501NG pyramid tool known by?
A: It is also called “pyramidal point”, “pyramidal moil point”, “pyramid moil”. Montabert documents use “pyramidal”, “working tool”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 69
- Dimensions
- 106x1000x106 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Pyramid Tool
Part code: 211009930
Rammer E68Pyramid Tool
Part code: 260029930
Soosan SB50Pyramid Tool
Part code: 211014930
Furukawa F22Pyramid Tool
Part code: 240035930
Furukawa HB20GPyramid Tool
Part code: 240020930
Rammer BR999Pyramid Tool
Part code: 260038930
Montabert V55Pyramid Tool
Part code: 210061930
Rammer G80Pyramid Tool
Part code: 260058930
Socomec MDO250Pyramid Tool
Part code: 254015930
Soosan SB70Pyramid Tool
Part code: 211017930
Furukawa F35Pyramid Tool
Part code: 240038930
