JCB HM380Dust Grooved Pyramid Tool
Part code: 218033932
Olimpa OLP5050 Dust Grooved Pyramid Tool
- Breaker: Olimpa OLP5050
- Tool type: Dust grooved pyramid tool
- Diameter: 190 mm
- Length: 1490 mm
- Weight: 308 kg
- Material: OEM quality, heat-treated alloy steel
- Delivery: fast delivery from stock or made in 5 working days
Prices are visible to partners
Sign in to see partner pricing and order online.
Prices are visible to partnersPartner Login
*Representative image. May vary depending on brand and model.
Dust grooved pyramid tool for the Olimpa OLP5050 hydraulic breaker: Ø190 mm diameter, 1490 mm length, 308 kg. OEM quality, made from heat-treated alloy steel; fast delivery from stock or made in 5 working days.
Technical Data
| Breaker Brand / Model | Olimpa OLP5050 |
|---|---|
| Tool Type | Pyramid Tool |
| Option | Dust Grooved |
| Diameter | 190 mm |
| Overall Length | 1490 mm |
| Weight | 308 kg |
| Material | Heat-treated alloy steel |
| Product Code | 222108932 |
| Delivery | Fast delivery from stock or made in 5 working days |
Where Is a Pyramid Tool Used?
Pyramid tools penetrate non-abrasive materials of varying strength quickly. The pointed geometry and cutting angle give high penetration rates with little effort in concrete and similar materials.
- Primary demolition
- Secondary demolition
- Trenching
- Recycling
- Tunneling
- Primary breaking
- Landscaping
According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
The dust grooves guide dust and fine particles away from the breaking zone. Visibility and precision improve, tool wear and heat build-up drop, and the tool keeps its performance longer.
Correct Use: Three Rules
- Work perpendicular. Keep the breaker at a right angle to the surface and avoid side loads. Angled pushing wears the bushings and moves the piston off the tool axis.
- Do not pry. Rocking the tool like a lever before it is fully seated, or rotating the breaker while the tool is embedded, is the most common cause of tool breakage.
- Do not blank fire. If the breaker strikes without the tool touching the surface, all the energy goes into the retaining pins and the tool's pin slots; pins break and slots are destroyed.
Breakage caused by ignoring these rules is not covered by the warranty. See our tool selection guide, the tool use section and the Tool User Manual and Warranty Terms.
Other Tool Types for Olimpa OLP5050
| Tool Type and Size | Options |
|---|---|
| Moil Point ToolØ190 x 1490 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Chisel ToolØ190 x 1490 mm | Standard · Dust Grooved · Hard Rock · Dust Grooved + Hard Rock |
| Pyramid ToolØ190 x 1490 mm | Standard · Dust Grooved (this page) · Hard Rock · Dust Grooved + Hard Rock |
| Blunt ToolØ190 x 1490 mm | Standard · Hard Rock |
Wide chisel, tarmac cutter and driving tools are made to order; if you need one of these for your Olimpa OLP5050, write to sales@hkm.com.tr.
Olimpa OLP5050 Spare Parts
Check the bushings when you change the tool: worn lower and upper bushings can break both the tool and the piston.
Manufacturing, Delivery and Warranty
HKM manufactures this tool to OEM quality from heat-treated alloy steel. Tools in stock ship quickly; if not in stock, the tool is made in 5 working days. Transport time is added depending on the method (road, air, sea).
Tools are warranted against manufacturing defects only; breakage caused by improper use is not covered.
Frequently Asked Questions
Q: What are the dimensions of the Olimpa OLP5050 dust grooved pyramid tool?
A: The Olimpa OLP5050 dust grooved pyramid tool is made for the Olimpa OLP5050 hydraulic breaker: diameter 190 mm, overall length 1490 mm, weight 308 kg. Just state your breaker brand and model when you order.
Q: Will another tool with the same diameter and length fit my Olimpa OLP5050?
A: Not always. The position and shape of the retaining pin slot change with brand and model; a tool with the same diameter and length may not fit. This tool is made to the slot dimensions of the Olimpa OLP5050.
Q: What is the Olimpa OLP5050 dust grooved pyramid tool used for?
A: The Olimpa OLP5050 dust grooved pyramid tool is mainly used for: primary demolition, secondary demolition, trenching, recycling, tunneling, primary breaking, landscaping. According to the material table in our manual, it is recommended for massive (monolithic) sedimentary rock.
Q: What do the dust grooves on the Olimpa OLP5050 dust grooved pyramid tool do?
A: The dust grooves guide dust and fine particles away from the breaking zone. Visibility and precision improve, tool wear and heat build-up drop, and the tool keeps its performance longer.
Q: Which other tool types are available for the Olimpa OLP5050?
A: We make 14 different tools for the Olimpa OLP5050: moil point tools, chisel tools, pyramid tools, blunt tools, with dust grooved and hard rock options. You can reach all of them from the Other Tool Types table on this page.
Q: How long is the delivery time for the Olimpa OLP5050 dust grooved pyramid tool?
A: If the Olimpa OLP5050 dust grooved pyramid tool is in stock, it ships quickly. If not, it is made in 5 working days; transport time is added depending on the shipping method.
Q: Is the Olimpa OLP5050 dust grooved pyramid tool covered by warranty?
A: Like all HKM breaker tools, the Olimpa OLP5050 dust grooved pyramid tool is warranted against manufacturing defects only. The fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered. Breakage from prying, blank firing, rotating the embedded tool or working with worn bushings is not covered.
Q: What shortens the life of the Olimpa OLP5050 dust grooved pyramid tool the most?
A: Prying before the tool is fully seated, blank firing, striking one spot for too long, insufficient or wrong grease, and working with worn bushings.
Q: What else should I check when I change the tool on my Olimpa OLP5050?
A: Compare the inner diameters of the lower and upper bushings and the thrust bushing surface with the tolerances in your breaker's service manual. Worn bushings move the tool and piston off axis. The Olimpa OLP5050 bushings are listed in the Spare Parts section on this page.
Q: What other names is the Olimpa OLP5050 dust grooved pyramid tool known by?
A: It is also called “pyramidal point”, “pyramidal moil point”, “pyramid moil”. Breaker tools in general are also known as breaker chisels, working tools or hammer tools.
Product Information
- Weight (kg)
- 308
- Dimensions
- 190x1490x190 cm
- Warranty
- Please review the Tool User Manual and Warranty Terms document on this page. HKM breaker tools are warranted against manufacturing defects only. If a tool breaks, the fracture surface is examined; if the fracture started from a flaw inside the material, the tool is covered by the warranty. Damage caused by improper use is not covered: prying before the tool is fully seated, blank firing, rotating or side-loading the breaker while the tool is embedded, striking the surface with the tool using the boom, and working with worn bushings.
- Delivery Information
- Delivery time is 7 business days for orders within Turkiye. For orders outside Turkiye, the transport time will be added. But for the products that we have in stock, the delivery time will be shortened significantly. For more information; contact sales@hkm.com.tr
Similar Products
Soosan SB40Dust Grooved Pyramid Tool
Part code: 211009932
Rammer E68Dust Grooved Pyramid Tool
Part code: 260029932
Soosan SB50Dust Grooved Pyramid Tool
Part code: 211014932
Furukawa F22Dust Grooved Pyramid Tool
Part code: 240035932
Furukawa HB20GDust Grooved Pyramid Tool
Part code: 240020932
Rammer BR999Dust Grooved Pyramid Tool
Part code: 260038932
Montabert V55Dust Grooved Pyramid Tool
Part code: 210061932
Rammer G80Dust Grooved Pyramid Tool
Part code: 260058932
Socomec MDO250Dust Grooved Pyramid Tool
Part code: 254015932
Soosan SB70Dust Grooved Pyramid Tool
Part code: 211017932
Furukawa F35Dust Grooved Pyramid Tool
Part code: 240038932
